Software/App & Printer Driver

Download the App, Software or Printer Driver for your e-mark

The e-mark is operated through a software on a smartphone, tablet and additionally on the PC. You can create your own imprints in the app/software including logos, texts, images, numbers, bar codes and much more. Then it is just sent to the e-mark and it is ready to print!

Mobile app

The mobile app is available for Android and iOS devices and requires Android 5.0, iOS 11 or higher. It uses Wifi to send imprints from the App to the e-mark.
Download the app for free before buying and have a look at the many possibilities of the e-mark!

Please note: From 01/06/2021 the e-mark app will no longer support Android 5 and Android 6.

Download the e-mark app

Download the e-mark create app

Windows Desktop Version

In addition to the mobile version of the e-mark app, also the desktop version for Windows PCs is available now. It provides the same functionalities as the mobile app and has a similar touch & feel. Imprints are transferred via Wifi or USB. It works with PCs running on Windows 7, 8.1 or 10.

Please note: From 01/06/2021 the e-mark desktop version will no longer support Windows 7.

Please note the following before using the windows version:

  • When installing your e-mark for the first time, please connect your emark first via Wifi. This can be done through the desktop version or the mobile App. Then complete the firmware update on the e-mark - a message pops up automatically.
  • When the firmware is updated, you can then also switch to USB.
  • When using the desktop version with Wifi connection, it may be required to disconnect LAN connections first
  • The e-mark can either be connected via Wifi or USB, note the colour of the light on the back right side of the e-mark:
    blue = Wifi connection, pink = USB connection

Help improve our software and share your feedback in our support centre.

Printer Driver for Windows

As an additional offer for using the COLOP e-mark on a desktop PC, a printer driver for Windows devices from Windows 10 is now available.

The printer driver enables files from programs that support printing, such as Microsoft Word, Paint or Photohop, to be sent directly to a connected COLOP e-mark (USB or Wifi).

Additional settings, such as color intensity and contrast, print repetition, etc. are also possible.

Printer Driver Version: 1.01

Checking your mcu-id...

Thank you for downloading our driver!

Enjoy printing directly to your e-mark.


There was an error submitting your mcu-id. Please try again later.

You can find the MCU-ID underneath the e-mark cover or on the packaging.

Please scan the 2D-matrix-code to display the MCU-ID.

Please note the following before using the printer driver:

  • When using your e-mark for the first time, a Wifi connection with the COLOP e-mark app or the COLOP e-mark Windows software must be established beforehand. Next, please carry out the firmware update on the e-mark - a message will be displayed automatically.
  • Successful installation of the new firmware ensures compatibility and you can now switch to USB.
  • As usual, the e-mark can be connected either via Wifi or a USB cable, please note the color of the light on the right rear of the e-mark.

blue = Wifi connection, pink = USB connection

The MCU-ID of your device required for the download can be found on the label under the cover of the e-mark or on the packaging label. With some devices, the number may not be shown; here, the 2D code must be scanned in to get the MCU-ID.

Download the Printer Driver Manual:

Download Printer Driver Guide

Help us improve our printer driver and share your feedback in the e-mark support center.


Microsoft Word:

Microsoft Excel: