Technical Features

These features apply for the e-mark as well as the e-mark create

  • Wifi-connection

    Wifi-connection

    The e-mark generates its own WIFI network, through which it connects to your mobile device (such as a smartphone or tablet). Imprints are transferred quickly and can be printed immediately.

  • Markings for exact positioning

    Markings for exact positioning

    Markings on the side of the e-mark ensure a reliable positioning on your documents/items. A notch on the side of the device shows the center line of the imprint. It works perfectly with COLOP e-mark labels and other e-mark accessories.

  • Transparent window

    Transparent window

    A transparent window in the front provides a better view of the imprint during marking.

  • Light strip

    Light strip

    Rotating LEDs around the e-mark indicate the current state of the e-mark and connectivity to the software.

  • Tricolour ink cartridge

    Tricolour ink cartridge

    Easily replaceable and long-lasting cartridge for high quality colour imprints. Make up to 5000 imprints with one cartridge (range depending on size and ink coverage).

  • Printhead

    Printhead

    The print head is integrated in the cartridge and visible on the bottom side of the e-mark.

  • Battery

    Battery

    The inbuilt quick-charging Li-ion battery (11.1 V) allows use of the e-mark for several hours (4.5 hours continuous marking) without power supply. It can be fully charged within 3 hours (0 - 100 %).

  • Docking station

    Docking station

    The docking station serves for quick charging of the battery and helps prevent the print head from drying out.

  • Protection cap

    Protection cap

    Is integrated in the docking station and protects the print head optimally against drying out. The e-mark should always be put in the docking station with its integrated protecting cap.

  • Sliding wheels

    Sliding wheels

    Move gently from left to right or vice versa to make an imprint, supported by sliding wheels.

  • Sensor

    Sensor

    An optical sensor provides speed control for the best and most reliable imprint results.

  • USB-interface

    USB-interface

    Connect the e-mark with your computer via a micro-USB cable (for e-mark+ only). Note that charging can only be done with the power cable.

  • ON/OFF switch

    ON/OFF switch

    Switch on the e-mark through an opening on the docking station to avoid drying out of the print head.

  • Contacts

    Contacts

    Four contact pins provide a connection between the e-mark and docking station for charging.

  • Protective cover

    Protective cover

    Can be easily opened to change a cartridge via a small notch on the bottom of the cover.